PARMITER

TR76/86

PARMITER TR 76 / 86 TRAILED MACHINE FITTED WITH ORIGINAL
K.O.PRESSURE FRAME PRE-STETCH 750mm UNIT

Below : FITTING THE FILM TECHNIQUE FILM TENSIONER
Simply remove the old unit, slot in new unit, relocate the 25mm pivot rod, drill new 8 mm hole replace bolt.
When fitting make sure the large gear runs on the idler roller( Large gear situated in the wider part of the gear housing)
Threading the film into the new unit is the same as before, follow diagram on the film tensioner mast.

PARMITER TR 76 / TR 86 FITTED WITH NEW 750 mm FILM TENSIONER (above)

Above : PARMITER TR 76 / 86 MACHINE IN OPERATION USING 750 mm FILM

TR86/96

FILM ROLL HOLDER ON SWING ARM

Above : PARMITER TR86 / 96 TRAILED MACHINE
(Original 750mm K.O. pre-stretch unit)

Above : PARMITER TR 86 / 96 TRAILED MACHINE FITTED WITH NEW FILM TECHNIQUE
750 mm FILM TENSIONER AND ADAPTOR BRACKET

Above : PARMITER TR 86 / 96 FILM ROLL HOLDER ON SWING ARM